Energy & Utilitieswebemailapi

Rooftop solar connection application

Application documents are read, transformer capacity and regulation checked, gaps reported the same day; the connection opinion belongs to the engineer.

In short

Rooftop solar connection application is an agent scenario in the Energy & Utilities sector running on the web, email, api channels. Trigger: Rooftop solar connection application from the DSO portal. The Connection Supervisor coordinates 4 specialist agents (Document Agent, Grid Agent, Regulation Agent, Case Agent) across 4 systems (Connection Portal, GIS / Network Model, Regulation Vector Store (EPDK), E-mail); of 9 steps, 1 write to systems and 2 are checks or approvals. Outcome: Technical pre-assessment and gap list ready; connection opinion published with engineer approval. Approval rule: The connection opinion is always signed by a network planning engineer.

Energy & Utilities

Rooftop solar connection application

SUPERVISORAGENTSSYSTEMSConnection Supervisorplan · route · approveDocument Agentaginies-konrul-1on-premGrid Agentaginies-tulpar-4on-premRegulation Agentaginies-talay-2on-premCase Agentaginies-sunkar-1on-premConnection PortalGIS / Network ModelRegulation Vector Store(EPDK)E-mail
run #41,289,256elapsed 0 mstokens 0est. cost $0.000status —Approval rule: The connection opinion is always signed by a network planning engineer
Agents in this run
Connection Supervisorsupervisorplans, routes, approves
Document Agentaginies-konrul-1 · on-premReads the single-line diagram, deed and permit
Grid Agentaginies-tulpar-4 · on-premEvaluates transformer and feeder capacity
Regulation Agentaginies-talay-2 · on-premChecks against unlicensed-generation regulation
Case Agentaginies-sunkar-1 · on-premUpdates the application and informs the applicant
Audit trail00:00.00
  1. ■completed 

Simulation · derived from real agent definitions · every agent can be built by dialogue with the Autonomous Agent and validated with a test corpus

Trigger

Rooftop solar connection application from the DSO portal

Outcome

Technical pre-assessment and gap list ready; connection opinion published with engineer approval

Agents

SUPERVISOR

Connection Supervisor

Decomposes the objective, delegates to agents, manages approval points, merges the result.

aginies-konrul-1 · on-prem

Document Agent

Reads the single-line diagram, deed and permit

extract_documentclassify_documentcheck_completeness
aginies-tulpar-4 · on-prem

Grid Agent

Evaluates transformer and feeder capacity

get_transformer_loadget_connected_generationassess_hosting_capacity
aginies-talay-2 · on-prem

Regulation Agent

Checks against unlicensed-generation regulation

search_regulationcheck_eligibilitydraft_opinion
aginies-sunkar-1 · on-prem

Case Agent

Updates the application and informs the applicant

update_applicationsend_email

Steps

#KindAgentWhat happensSystemmstok
01 ingest Connection Supervisor Application B-2026-31877: 48 kWp rooftop solar, commercial customer, 6 documents uploaded Connection Portal 200 —
02 reason Document Agent Documents read: single-line diagram valid, deed matches, building permit missing a page — 980 1,300
03 tool Grid Agent Transformer TR-2291: 400 kVA, peak load 71%, connected generation 96 kWp GIS / Network Model 460 —
04 reason Grid Agent Hosting capacity sufficient: with 48 kWp total generation is 36% of transformer rating — 700 760
05 retrieve Regulation Agent Regulation: same metering point as consumption, within contracted power limit → eligible Regulation Vector Store (EPDK) 480 520
06 verify Regulation Agent Opinion draft: positive, conditional on protection settings and meter change; 1 missing document — 620 640
07 approval Connection Supervisor Connection opinion → network planning engineer reviewed and signed — 3,000 —
08 write Case Agent Application set to “conditionally positive”, opinion document attached Connection Portal 440 —
09 notify Case Agent Opinion and missing-document list e-mailed to the applicant; 15-day completion window E-mail 240 —

Time to move from experimenting with AI to transforming with it.

In a 30-minute discovery session we take your 2–3 priority business problems, show a live demo of a similar scenario, and draft a roadmap that starts with the Value layer.

Book a 30-minute discovery session → dahi@aginies.com
  1. Your 2–3 priority problems
  2. Live demo of a similar scenario
  3. Roadmap starting with value analysis